Make Norton Ghost Bootable Usb

admin 02.04.2020 No Commentson Make Norton Ghost Bootable Usb

How to Make a Norton Ghost Boot From USB Sometimes to install a computer does not have to go through the CDROM, as I usually do is just my computer and then I installed a full install and then my backup with norton GHOST that it becomes a file with the extension. Later run norton ghost then we could clone the windows of the windows that we.

. Automated System Restore - Ever wanted to have a way of pressing a key on booting from your PC or Notebook and restoring an image of your Windows installation in just a few minutes just like the PC manufacturers do. Here is how to do it very easily using CloneZilla and it's free! Multiple image backups are easily done too (a USB flash drive is only used to prepare hard disk). Two are available to show you how. How to fix write-protected disks - Has one of your disks become write-protected? This tutorial describes some ways to fix it.

All about 'Fake' SD cards and USB Flash drives. How to re-program the firmware on USB Flash drives. Boot Hirens Boot CD as an ISO from a USB drive. Boot Hirens Boot CDfrom a USB drive.

Download ImageX, BCDBoot and other WAIK tools without having to download the whole WAIK. Quickly setup PXE booting to install any Windows OS or PXE boot linux, etc. Using SERVA. How to create a multiple partition USB Flash drive under Windows. Windows 8 To Go! - Download Windows 8 Consumer version to a USB drive and boot from it to try Windows 8 out.

Unlike previous versions of Windows, Windows 8 is already configured to run from a USB drive - if you have a USB 3 drive, why not test out booting Windows 8 from a USB 3 port and see how fast USB 3 really is!. Boot the Hirens Boot CD (v13-v15) from your USB drive - The Hirens Boot CD is an illegal (though CDs can be found for sale on eBay!), cut-down version of Windows XP which will run from a USB drive. This tutorial shows you how to make a bootable USB drive by extracting and copying the Hirens to your USB drive.

You can then boot directly from your USB drive and access most Windows computers. Install Windows Vista, Windows 7 or Server 2K8 R2 from a USB Flash drive - This popular tutorial allows you to have a USB Flash drive which can install any or all of these Windows OS's to a system's hard drive just by copying of the ISO files.

This means you can carry all the ISO files on just one USB pen drive and install any version you want on any system you want. Of course, you will have to activate Windows in the normal legal way after installation.

Boot Windows 7 directly from a USB drive - This tutorial describes how you can install Windows 7 directly onto a USB drive (preferably a USB hard disk as Flash drives are very slow!). You can then plug the USB disk into another system that does not have a working internal hard drive and boot directly to Windows 7 from the USB hard drive.

GRUB4DOS TUTORIAL - This tutorial introduces you to grub4dos. Grub4dos is used in most of my tutorials and it is a boot loader and menu system that allows you to create a multi-boot USB drive. Once you become familiar with grub4dos menus, you can easily create a bootable USB drive. RMPrepUSB has features which allow you to easily install and edit menus for this very popular utility. Install Windows 7 AND XP from the same USB drive - This tutorial effectively combines Tutorials #47 and #30 into one. Just download the one files and unzip it, then add your XP ISO file and Windows 7 ISO file and you can then install either XP and/or Windows 7 onto any system you like!

Why not make a dual boot system?. Ultimate Boot CD for Windows - this tutorial contains instructions on how to make a cut-down version of XP using an XP SP2 or SP3 CD or ISO file using the UBCD4Win utility.

You can either extract the files from the ISO file, or if you want to make a multi-boot USB drive you can simply copy the ISO file to the USB drive and boot from the ISO file directly (see 2nd part of tutorial). Boot BackTrack 5 from a USB drive - BackTrack 5 is a very popular linux OS version that can be used to check wireless network security. It also contains a lot of linux network drivers and a working gcc environment (useful for compiling open source linux applications). Note: BackTrack 5 cannot be run directly from an ISO, the contents need to be extracted onto a USB drive. USB - Universal Serial Bus - a specification to allow communication between a device and a host controller.

USB Drive - a storage device that communicates via USB. USB Hard Disk - a hard disk that connects to a host controller (e.g. Computer) using USB. USB Flash drive - a flash memory dive that connects to a host controller (e.g. Computer) using USB. UFD - USB Flash drive.

Bootable UFD - a USB flash drive that a computer can boot from instead of a hard disk or CDROM/DVD. Pen drive - a nickname for a UFD. Thumb drive - a nickname for a UFD. Fake USB Flash drive - a USB flash drive that reports its capacity incorrectly and may also contain faulty flash memory. PBR - Partition Boot Record, contains the boot code and filesystem tables. It is located at the start of a formatted partition and is typically used to boot an OS.

VBR - Volume Boot Record - see PBR - alternative name for PBR. MBR - 512 byte Master Boot Record, contains the initial boot code which determines which partition to boot to. A partition table within the MBR contains details of where the partitions are located and which one is bootable. Floppy disks do not have an MBR. ZIP disks do have an MBR but boot as large (super) floppy drives. OS - Operating System such as Windows, MS-DOS, FreeDOS, linux, etc.

RMPrepUSB is a user-friendly Windows graphical front-end which calls it's brother application RM Part USB (which does all the hard work!).RM Part USB is a Windows command line utility and does not have a GUI and can be used in batch/script files (type RMPartUSB to see help/usage text in a Windows command console). RMPartUSB makes a partition of any size and is primarily intended for USB Flash Drive (UFD) memory sticks, although it can be used on USB hard drives or USB card readers to create a bootable partition or even non-USB drives. RMPartUSBalso places boot code on the USB device for either XP/WinPEv1 (ntldr), Vista/WinPEv2/Win7 (bootmgr), MS-DOS (io.sys) or FreeDos (kernel.sys).

RM Part USB does not place any files on the UFD - you must copy these over yourself or set the Copy OS Files option in RMPrepUSB to copy over the contents of a folder of your choice. What do the buttons in RMPrepUSB actually do?. Prepare - Runs RMPartUSB which will wipe, partition and format the selected USB drive using the preset options (set by items 1-5). Then copy over files from a preset folder (optional). USB Info - shows partition info of the selected USB drive (displays any sector). Quick Size Test - Checks the drive capacity in just a few minutes by writing and reading to certain blocks. This test will DESTROY any files on your USB drive and is not a thorough test, if it passes then use H2TESTW for a thorough test (which can take many hours!).

Speed Test - Reads and writes approx. 63MB of data sequentially to your USB drive to calculate the read and write speed. This test will not destroy any data on your USB drive, however if anything goes wrong you may lose all your drives contents! Results are appended to a CSV file every time it is run, so you can build up a speed library.

Note that real life use of the USB drive when using a filesystem will always give slower results. Also, results will vary depending on what OS you have and the USB drivers and chipset used in the mainboard. Install grub4dos - This installs grub4dos onto your USB drive. You can replace the version shipped with RMPrepUSB with a version of your own by replacing grubinst.exe and grldr in the RMPrepUSB folder, if you like. Grub4dos boot files normally contain a menu.lst file to present the user with menu boot options. Clean - wipes the first 100 sectors on the USB drive. If your system is having trouble accessing your USB drive, try this option and remove and re-insert the USB drive.

ImageTools. File - USB - Reads the contents of a binary image file and write it to the USB drive. USB - File - Reads the contents of the USB drive (sectors) and writes them to a file. Note: These two commands are quite powerful and can be used to save and restore USB drive images (or just partition images or even just single sectors). They can be used in a similar way to dd.exe but more safely.

For instance you could replace just the MBR on a USB drive or write a bootrom file to a USB drive (e.g. PXE boot rom). If you are unsure what options to choose, use '0' or the suggested default. V2.1.625+ can also convert virtual drives to raw images and copy these to your USB drive. File Info - Displays partition information about the MBR (or any sector) on the USB drive. Eject - Ejects the drive so you can safely remove it without causing any filesystem corruption.

ALWAYS use this button (or the Windows Safely Remove Drive USB icon in the system tray) before pulling out the USB plug. As long as you do this you should never get a 'corrupted drive - format drive?'

Message from Windows ever again!. Refresh - re-detects USB drives (RMPrepUSB detects any new drives that are inserted after a few seconds automatically). Install Syslinux - runs the syslinux.exe command to install the syslinux boot code to the USB drive - does not wipe or format the USB drive.

Create Ext2/3/4 FS - creates a file on the USB stick (e.g. Casper-rw) of any name and size which can be recognised and mounted as an ext filesystem by linux OS's. Useful for persistent Live linux OS distros with Easy2Boot. Test using QEMU Emulator (F11) - uses the 32-bit QEMU emulator to boot your USB drive within Windows. You can boot to linux or WinPE or Windows within a QEMU emulator window. This does not change your system in any way. Useful to test out grub4dos or syslinux menus or check that your USB drive actually boots without needing to unplug it and plug it into another system every time.

Note that a 32-bit Intel x86 CPU is emulated and the maximum amount if memory that can be assigned is aprox 900-1100MB. If too much memory is assigned, QEMU will not run correctly. Force use of LBA calls - Use this option if you have problems booting on certain systems.

This option sets the CHS values in the partition table to the maximum value and thus should help to ensure that a BIOS uses 255 heads x 63 sectors per track LBA translation values. If you have problems booting, try ticking or unticking this option.

It may work for some systems but not for others. Use 64hd/32sec if poss. if the partition is not too large (.

-->

Applies To: Windows Server 2016 Essentials, Windows Server 2012 R2 Essentials, Windows Server 2012 Essentials

You can create a bootable USB flash drive to use to deploy Windows Server Essentials. The first step is to prepare the USB flash drive by using DiskPart, which is a command-line utility. For information about DiskPart, see DiskPart Command-Line Options.

Tip

To create a bootable USB flash drive for use in recovering or reinstalling Windows on a PC instead of a server, see Create a recovery drive.

For additional scenarios in which you may want to create or use a bootable USB flash drive, see the following topics:

To create a bootable USB flash drive

Insert a USB flash drive into a running computer.
Open a Command Prompt window as an administrator.
Type diskpart.
In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk, and then click ENTER. The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.
At the command prompt, type select disk <X>, where X is the drive number or drive letter of the USB flash drive, and then click ENTER.
Type clean, and the click ENTER. This command deletes all data from the USB flash drive.
To create a new primary partition on the USB flash drive, type create partition primary, and then click ENTER. Photosweeper x serial number lookup.
To select the partition that you just created, type select partition 1, and then click ENTER.
To format the partition, type format fs=ntfs quick, and then click ENTER.
Important
If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.
Type active, and then click ENTER.
Type exit, and then click ENTER.
When you finish preparing your custom image, save it to the root of the USB flash drive.

To create a bootable USB flash drive

See Also